CONTACTS US Tel : 0086-551-65765203
    Add: Boyan Industrial Park, Hi-tech District , Hefei City .Anhui ,China
    Web : www.395kk.com.
    E-mail : [email protected]


    1. Performance


    *  This Model is waterproof. The protection grade is IP63 and Max Power 800W.

    *  Wind Turbine and Load Adaptive Impedance Matching, maximize energy utilization.
    There is internal resistance in wind generators, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power.

    *  Protect wind generator from over-revolution speed, over-voltage and over-current
    Max revolution speed, max voltage and max current of wind generator could be set. Once the actual revolution speed, voltage or current over the default value, PWM intelligent unloading will start automatically. That protect wind generator.

    *  Intelligent limiting of batteries max current
    Batteries maximum capacity could be set through this controller. According to the set maximum capacity, controller could calculate the maximum charging current. Then batteries will be protected.

    *  Temperature compensation for battery
    According to the environment temperature, the controller could adjust some voltages of battery to ensure that the battery could be fully charged in winter

    *  Temperature protection
    According to detect the inner temperature, the controller could adjust the charging power and protect the whole system

    *  Solar MPPT charging, improve energy utilization
    There is internal resistance in Solar panels, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power.

    *  Braking manually

    *  Wind charging manual switch

    On the controller you can manually set whether using wind charge to battery.

    *  Solar charging manual switch
    On the controller you can manually set whether using solar charge to battery.

    *  DC output manual switch
    Users could manually set whether use DC output.

    *  Two DC output, each one has 9 output modes

    *  RS232 interface
    By serial interface communication, you could monitor the whole system, storage and analyze data. Program could be upgraded by serial interface. Connect PC and controller by serial interface. You could set the parameters on PC and controller simultaneously.Software is free, easy to operate and no need to be installed.

    *  The LED lights on controller to display the working state



    2. Optional Functions

    *  Optional BOOST function(If do not buy Boost Wind Solar Streetlight Controller, there is no this function)
    Once wind generator voltage is lower than battery voltage, controller starts boost module automatically to charge to battery.

    *  Optional BUCK function(If do not buy Buck Wind Solar Streetlight Controller, there is no this function)
    Once wind generator voltage is higher than battery voltage, controller starts buck module automatically to charge to battery.

    *  Optional BOOST and BUCK function in one(If do not buy Boost & Buck Wind Solar Streetlight Controller, there is no this function)
    Once wind generator voltage is lower than battery voltage, controller starts boost module automatically. Wind generator voltage is increased to the charging voltage, and it is boost charging. When wind generator voltage is higher than battery voltage, in order to acquire max power,buck module of controller will be started, the generator is buck charging.Loads lower the revolution speed of wind generator, when it is breeze. That decreases the output power of wind generator. Through max current tracking (MCT) and max power point tracking (MPPT), output of wind generator is stabilized at the max balance of wind energy utilization. Combine with boost and buck function, wind energy utilization is increased

    *  Optional LCD Display Function
    If you need, you could to buy LCD screen to browse and set parameters.

    3. Parameters

    Item No.

    TGWS300W-12V

    Rated Battery Voltage

    12V

    Rated Wind Turbine Power

    200W

    Wind Turbine Maximum Input Power

    350W

    Rated Solar Power

    100W

    Maximum PV Input Voltage

    60V

    Wind dumpload Voltage ( Vmax )

    60V (Adjustable

    Wind dumpload Rotate Speed ( Rota )

    500R (Adjustable)

    Wind Pole Logarithm ( Pole )

    10D ( Adjustable)

    Wind Charging Range

    DC (6V-60V)

    Wind Start Charging Voltage ( CutIn )

    6V ( Adjustable)

    Under Voltage ( Low )

    10.2V (Adjustable)

    Under Voltage Recovery Voltage ( Rlow )

    11.5V (Adjustable )

    Float Voltage ( Flot )

    13.5V (Adjustable)

    Over Voltage ( Full )

    14.7V( Adjustable )

    Over Voltage Recovery Voltage ( RFull )

    13.2V ( Adjustable )

    Over-Load Voltage ( Out )

    17.5V (Adjustable)

    Over-Load Recovery Voltage ( Rout )

    15.0V ( Adjustable)

    PV Voltage Of Light-Control On (Lon )

    6V (Adjustable)

    PV Voltage Of Light-Control Off (Loff )

    6V (Adjustable)

    Line 1 Rated Output Current

    15A

    Line 2 Rated Output Current

    15A

    Line 1 Output Mode(Factory Default)

    Mode7: Light-control on, 3 periods working, Light-control off  (Adjustable)

    Line 2 Output Mode(Factory Default)

    Mode 4: full power working (Adjustable)

    Dump load control mode

    Over rotate speed limiting, Over voltage limiting, Over current limiting, PWM

    Wind Charging Mode

    PWM,( MPPT for boost, MPPT for buck , MPPT for Boost and Buck )

    Solar Charging Mode

    MPPT (Buck)& PWM

    Display Mode

    LED or LCD( Optional )

    Display Parameters

    Battery : Voltage , Charging Current , Percentage of battery power

    Wind : Voltage , Charging Current , Rotate Speed , Output current, Output Power

    Solar : Voltage , Charging Current

    Loads : Current , Power , Working mode

    System : State ,Generated energy , Erro code

    Working Temperature &Humidity

    -20~+55°C/35~85%RH(Without Condensation)

    Quiescent Current

    ≤1.5W

     

     

    Protection Function

    Battery: Over-discharge protection,Over-charge protection,Anti-reverse connection,Temperature Compensation.          
    Wind: Over rotate speed protection, Over voltage protection, Over current protection. 

    Loads: Over-load protection, Short circuit protection

    Communication Function

    RS232

    Optional Function

    LCD display

    Controller Size

    280mm*145mm*90mm

    Package Size

    385mm*205mm*150mm

    Net Weight

    2.6Kg

    Gross Weight

    3.2Kg 


    Item No.

    TGWS400W-12V

    Rated Battery Voltage

    12V

    Rated Wind Turbine Power

    250W

    Wind Turbine Maximum Input Power

    380W

    Rated Solar Power

    150W

    Maximum PV Input Voltage

    60V

    Wind dumpload Voltage ( Vmax )

    60V (Adjustable

    Wind dumpload Rotate Speed ( Rota )

    500R (Adjustable)

    Wind Pole Logarithm ( Pole )

    10D ( Adjustable)

    Wind Charging Range

    DC (6V-60V)

    Wind Start Charging Voltage ( CutIn )

    6V ( Adjustable)

    Under Voltage ( Low )

    10.2V (Adjustable)

    Under Voltage Recovery Voltage ( Rlow )

    11.5V (Adjustable )

    Float Voltage ( Flot )

    13.5V (Adjustable)

    Over Voltage ( Full )

    14.7V( Adjustable )

    Over Voltage Recovery Voltage ( RFull )

    13.2V ( Adjustable )

    Over-Load Voltage ( Out )

    17.5V (Adjustable)

    Over-Load Recovery Voltage ( Rout )

    15.0V ( Adjustable)

    PV Voltage Of Light-Control On (Lon )

    6V (Adjustable)

    PV Voltage Of Light-Control Off (Loff )

    6V (Adjustable)

    Line 1 Rated Output Current

    15A

    Line 2 Rated Output Current

    15A

    Line 1 Output Mode(Factory Default)

    Mode7: Light-control on, 3 periods working, Light-control off  (Adjustable)

    Line 2 Output Mode(Factory Default)

    Mode 4: full power working (Adjustable)

    Dump load control mode

    Over rotate speed limiting, Over voltage limiting, Over current limiting, PWM

    Wind Charging Mode

    PWM,( MPPT for boost, MPPT for buck , MPPT for Boost and Buck )

    Solar Charging Mode

    MPPT (Buck)& PWM

    Display Mode

    LED or LCD( Optional )

    Display Parameters

    Battery : Voltage , Charging Current , Percentage of battery power

    Wind : Voltage , Charging Current , Rotate Speed , Output current, Output Power

    Solar : Voltage , Charging Current

    Loads : Current , Power , Working mode

    System : State ,Generated energy , Erro code

    Working Temperature &Humidity

    -20~+55°C/35~85%RH(Without Condensation)

    Quiescent Current

    ≤1.5W

     

     

    Protection Function

    Battery: Over-discharge protection,Over-charge protection,Anti-reverse connection,Temperature Compensation.          
    Wind: Over rotate speed protection, Over voltage protection, Over current protection. 

    Loads: Over-load protection, Short circuit protection

    Communication Function

    RS232

    Optional Function

    LCD display

    Controller Size

    280mm*145mm*90mm

    Package Size

    385mm*205mm*150mm

    Net Weight

    2.6Kg

    Gross Weight

    3.2Kg 



    Pre:800W-24V Hybrid Street Light Controller(Boost&Buck)
    Next:300W-12V Wind/Solar Hybrid Street Light Controller (Boost)
    国产亚洲综合视频在线